<< Click to Display Table of Contents > Output Range |
The AEB-2 provides a differential output signal as shown in figure 14.
Figure 14: AEB-2 analog output
The output range may be selected for each channel separately with solder jumpers on the top side of the AEB-2 as shown in figure 15 and described in table 4.
Figure 15: Output range selection
Output |
Jumper |
State |
Output range |
---|---|---|---|
X |
SJ1 |
Open |
-10 V..+10 V |
Closed |
-5 V..+5 V |
||
Y |
SJ3 |
Open |
-10 V..+10 V |
Closed |
-5 V..+5 V |
||
Z |
SJ5 |
Open |
-10 V..+10 V |
Closed |
-5 V..+5 V |
Table 4: AEB-2 output range selection
By default, the 3 jumpers SJ1, SJ3 and SJ5 are closed, i.e. the output range is set to -5 V..+5 V. |
---|